Sr. No. |
Name of the Laboratory |
Name of the Important equipment |
1 |
Electrical Engineering[EE] Lab |
- KVL & KCL Kit
- LT switchgear Kit
- Transformer 1Ф, 1kVA 230/115V
- Dimmerstat 1Ф 250V,8A Model 8D-1P
- Dimmerstat3Ф,440V,8A, Model 8D-3P
- 3 Ph Loading Rheostat
- 1 Ph Loading Rheostat
- Wattmeter 1 Ph 1A/2A,125/250/500V, LPF AE
|
2. |
Electrical Workshop Practices[EWP] Lab |
- Megger 10Ω (Earth Test with Kit)
- Star Delta Starter Test Kit
- Direct Online Starter Test Kit
- Earth Tester with Testing Kit Make –Nippen
- Lux MeterMake MECO
- Megger 500V,Insulation Tester 100ohm
- Digital Insulation Tester
- (MECO DIT-954, 5KV)
|
Power Electronics[PE] Lab |
- 30MHz Dual Channel 4 Trace Oscilloscope Model No. 803
- Bridge Inverter
- Discrete Component Trainer Model FALCON
|
Electrical Engineering Workshop[EEW] Lab |
- Dual Power Supply (2 x 30V, 2A)
- 50 MHz Band with 2 Channel Digital Storage Oscilloscope
- Motor Coils Winding Machine (Manual)
- Transformer Winding Machine (Manual)
|
3 |
Linear Electric Circuits [LEC] Lab |
- Digital Storage Oscilloscope 50MHz, Bandwidth 2 Channel
- Digital Panel Meter 200MA AC
|
Control System [CS] Lab |
- Scientech ST-2451 PID Controller
- Scientech ST-2306 Potentiometer as a Error Detector
- AC Servomotor ACS-01
- DC Motor DCM-01
- DC Speed Control DCS-01
- Synchro Devices SD-01
- DC Position Control DCP-01
- Stepper Motor SM-03
|
4 |
Electrical Measurement and Instrumentation
[EMI] Lab |
- De Sauty’s and Schering Kit
- Kelvin’s Double Bridge Kit
- Maxwell’s Bridge Kit
- Hay’s Bridge Kit
- 30MHz Dual Trace Oscilloscope
- 3MHz Signal Generator
- DC Power Supply (0-30V) 2A
- Inductive Load 3 Phase,4A, Star
- LVDT Trainer kit (07161140)
- Strain Gauge trainer (07161056)
|
Switchgear and Protection [SGP] Lab |
- Motor Protection Setup for 3-phase Induction Motor(1HP)
- Line Monitoring Relay for the Bus bar Protection
- Earth Leakage Protection of 3-phase Load
- Non-Directional Over current Relay Kit
- Differential Protection Relay
|
Embedded System[ES] Lab |
- Arduino UNO R3
- Node MCU
- ESP32
- OLED Displays
- 16 x 2 LCD Displays
- DC Motor (3-6v)
- Solid State Relay 25 A
- Thermistor (NTC & PTC)
- Sensor (Temp., Smoke, DHT, ultrasonic etc.)
|
5 |
Electrical Machines [EM] Lab |
- A.C. Slip ring I.M. with speed Control unit
- I.M. with D.C. Shunt Gen.set 3HP,415V, 3Ф, 1440 rpm
- D.C. Shunt Motor Coupled to D.C. Shunt Gen. Set3 HP, 220V, 2kW
- D.C. Shunt Motor Coupledto 3Ф Alternator, 3 HP,1500 rpm, 230V, with 415V
- Syn. Motor with control panel, 3 HP, 415 V, 3Ф
- D.C. Power Supply (Rectifier 30A)415V, 3ФI/P,O/P-230V
- Control panel of 3Ф I.M. & D.C. Gen
- Control panel for D.C Motor & D.C Gen.
- Control panel for D.C. Motor & Alternator
- Single Phase Transformer 2KVA,440V
- 5HP/220V/1500 RPM, DC Shunt Motor-3KVA/3Ph, 415V/1500 RPM,Salient Pole Alternator
- 5HP DC Shunt Motor – 3KVA Non-Salient Pole Syn. Alternator
- 5 HP DC Shunt Motor – 3 KW DC Shunt Generator
- 1 HP, 1800-2000 RPM, AC Series Motor With Mech. Load
|
6 |
High Voltage Engineering [HVE] Lab |
- 100 kV AC, 100kV DC test set with control panel
- Rod- Gap apparatus with uniform and non-uniform field electrodes
- 150mm Sphere gap with water resister (Manual)
- Horn gap Apparatus
- 30kV,30mA, High voltage tester with jig for solid insulating materials
- 0-60 kv Oil test set Motorized
- Corona cage without transformer
- Bushing
- 11kv Pin Type insulator with hardware
- 11kV, Disc Type insulator string (5 discs)
- ThermoBaro Hygrometer
|
7 |
Computer Applications in Power Systems [CAPS] Lab |
Computers |
Algorithms & Data Structures [ADSL] Lab |
Computers |
Python Programming [PPL] Lab |
Computers |
Electrical Drawing and Simulation [EDS] Lab |
Computers |
8 |
Project Lab |
- Electrical Control Panel (Transmission Line Control Panel)
- Raspberry PI 4
- Ckmine Make AC Drive 2.2KW/3HP, 3PH,5Amp(VFD)
- Digital PF Meter With AMP,Voltage and Frequency Single Phase
- Single Phase Dimmerstat ,CAP 8A, Close Type
- Single DC Power Supply, 0-30V, 0-2Amp With 2 Digital Meter
Three Phase Dimmerstat, CAP 8Amp, Close Type |